Aim
:
- Camshaft : a large pick-and-place 3 axis robot moves a
camshaft from a machining and grinding center to the marking
head. The robot holds the camshaft while being marked and
moves it to the storage container.
- Engine and flywheel : the marking head is mounted on an air cylinder
(slide).
General
information :
- Material : forged steel - machine steel - cast iron.
Performances
:
- Camshaft : 3 linear marking lines 2,5 mm height - 150
part / day 2 shifts.
- Flywheel : 4 mm height characters + logo + identification
of 8 characters 6 parts / hour.
- Engine : 7 mm height characters + 6 digit serial number.
6 parts / hour.
About Technifor
Applications
