• More than 100 different parts to be marked
• Marking time : 6 seconds
• Specifics :
  - avoid a protruding flange on the parts to be marked
  - avoid a protruding hose on top of the parts to be marked.

The TECHNIFOR marking machine is equiped with a customized pneumatic clamping tool. The clamping jaws can turn up to an angle of 180° to perfectly position perfect positioning of more than 100 different parts (height and diameter are variable).
A second automatic device sets the part into the marking position without interfering with the stylus origin. This system also releases the part after marking and is synchronized by using an input / output board installed in the central control unit.

Equipment involved :

• Marking head
• customized handling tool for actuator diameters 46,64 and 72mm
• standard marking software.